Vacuum

Compressed Air & Vacuum

AAD offers a comprehensive range of compressed air & vacuum products.

The complete range includes:

  • Compressors
  • Air Valves
  • Actuators
  • Electrical
  • Airline
  • ABS
  • Suspension Control
  • Hydraulics
  • Air Masters
  • Air Packs
  • Clutch Servos
Slack Adjusters

Slack Adjusters

AAD offer Protex Slack Adjusters and related parts.

The Commercial Slack Adjusters range include:

  • Manual 8 Spline
  • Manual 10 Spline
  • Manual 25 Spline
  • Manual 28 Spline
  • Manual 37 Spline
  • Automatic Slack Adjuster (Protex, Meritor, MVS, Crewson Brunner)
  • Slack Adjuster Service Parts
  • Clevis Yokes (Manual Slack Adjusters)
  • Clevis Yoke (Crewson Brunner Auto Slack Adjusters)
  • Clevis Pin (Manual Slack Adjuster)
  • Slack Adjuster Clevis Pin Bush
reconditioned units

Reconditioned Units

The AAD range of reconditioned units is second to none in Australia. All reconditioned units are rebuilt using only quality replacement components and are reconditioned to strict AAD remanufacturing procedures. All reconditioning takes place in our remanufacturing facility located within head office, in Melbourne. All units are full disassembled, shot blast to bare metal and rebuilt with all necessary new wearing parts. The end product is then tested in accordance to strict AAD testing procedures.

Common Reconditioned Assemblies

  • Air Masters
  • Air Packs
  • Compressors
  • Springbrakes
  • Vacuum Boosters
  • Valves
Brake Lining

Lining Sets

AAD offer Protex & Fras-Le branded lining sets. There’s a Protex Brake Lining Set for every Truck, Trailer and Bus.

Formulated to meet the specific quality and performance requirements of commercial vehicles, Protex Brake Lining Sets are available for most commercial vehicles. And, to ensure peace of mind for drivers and brake fitters alike, all Protex Commercial Linings are covered by a 12 month/ 24,000km warranty. Whatever type of driving you do, theres a Protex Commercial Lining to suit your needs and budget

Protex Standard

Protex linings are manufactured using state of the art non asbestos technology and are FF rated with good lining life and excellent drum wear characteristics. They provide stable, reliable and quiet operation. All lining sets are complete with rivets shrunk wrapped or boxed as per customers requirements. General use; a life span in excess of 40,000km under normal driving conditions can be expected.
Undrilled linings are also available.

Fras-Le AF/557
  • Suitable for trucks, trailers, and buses.
  • OEM quality product.
  • Noise-free, safe, and reliable.
  • Asbestos-free material that contains advanced fibers, providing: stable braking power, durability, and an excellent drum compatibility.
  • Minimizes maintenance and downtime.
  • High Structural strength that avoids cracks and disintegration.
  • Meets the FMVSS 121 (USA) requirements for axles of 23,000lbs (10.4 tons) GAWR with an AL factor of 165 (type 30 air chamber and 5.5” slack adjuster).
    ECE-R90 certified for motorized vehicles.
hydraulic fittings

Hydraulic Fittings

AAD offer a range of quality Protex Commercial hydraulic fittings & accessories.

The range includes:

  • Male Pipe Adaptors
  • Copper Gaskets
  • Hose & Pipe Clamps
  • Copper Nickle Tubing
  • Pipe Elbows
  • Pipe Joiners
  • Pipe Tees
  • Bundy Tubing
  • Adaptors
  • Flare Joiners
  • Flare Nuts
  • Banjo Unions
  • Banjo Bolts
  • Differential Unions (3 Way)
  • Bleeder Crews

 

Hubs

Hubs & Drums

Proven Protex Hubs, Drums & Wheel components are exclusively distributed by AAD and are manufactured to exacting standards meeting or exceeding SAEJ431. This ever increasing range has proven over the last decade to be of the highest standard and reliability.

The range includes:

  • Brake Drums
  • Brake Hubs
  • Hub Caps
  • Hub Cap Plugs
  • Hub Cap Gaskets
  • Hub Caps O-Rings
  • Hub Cap Window Kits
  • Hubodometers
  • Hub Seals (Freighter MKV SAF)
  • Hub Seal Carriers (BPW)
  • Hub Rings/ Trust Washers (BPW/SAF)
  • Dust Covers
  • Drive Hub Seals to suit Scania Trucks
  • Common Trailer/ Steer/ Drive Hub Seals
  • Trailer Wheel Bearings
  • Trailer Wheel Bearing Kits
  • Truck Wheel Bearings
  • Truck Wheel Bearing Kits
  • Axle Nut Kits
  • Axle Nuts
  • Axle Washers
  • Axle Circlips/ Spring Rings/ Split Pins
  • Wheel Studs
  • Wheel Nuts
  • Wheel Clamps
  • Brake Spiders
Commercial Disc Rotors

Disc Rotors

Proven Protex Commercial Disc Rotors are exclusively distributed by AAD and are manufactured to OE standards. This ever increasing range has proven over the last decade to be of the highest standard and reliability. Disc Rotors for commercial vehicles are obviously becoming more prevalent in the Australian market and to meet this demand Protex has introduced an extensive and rapidly developing range.

protrans-bendix

Disc Pads

In meeting the transition from Drum to disc brakes, AAD have introduced a range of commercial vehicle disc pads which is continually being developed. Commercial vehicle disc pads are available in Protex and Fras-Le brands. All of AAD’s Commercial vehicle disc brake pads are highly suited to our ever changing market.

Protex

AAD’s own brands of Protex commercial vehicle disc pads are suited to general use. A premium grade of friction material rated at a FF friction rating. Protex Commercial vehicle disc pads are available in a wide range of applications. Protex are economically priced for the budget conscious.

Fras-Le HD Pro

• Premium OE quality material
• ECE R90 certified material
• The best friction solution for stop and go applications, BRT, mining and garbage trucks
• Excellent braking efficiency
• Quiet, safe, and reliable
• Advanced mechanical retention system
• Exceptional durability, stable performance & long life formulation under various temperature conditions
• Developed & designed for heavy duty, commercial vehicles, coaches & transit applications
• Low aggressiveness to the brake disc
• Suitable for trucks, trailers, and buses
• Large V-groove prevents bridging of wear debris under heavy duty conditions
• High structural integrity and mechanical resistance
• Friction coating to improve initial performance
• Asbestos-free

 

bonded shoes

Bonded Shoes

The AAD range of shoes is available in riveted or bonded shoes.

Bonded shoes are radius ground and all shoes are supplied as a boxed matched set.

Protex shoes are offered as either bonded or riveted (depending on lining configuration availability), thus meeting specific customer requirements.

AAD’s offering results in excess of 400 possible configurations. Due to our
flexibility we offer variation in the following; platform type, lining type, friction rating, lining thickness, fixing method (bonded or riveted) and re-enforcing washers.

 

 

Fras-Le AF/557

  • Suitable for trucks, trailers, and buses.
  • OEM quality product.
  • Noise-free, safe, and reliable.
  • Asbestos-free material that contains advanced fibers, providing: stable braking power, durability, and an excellent drum compatibility.
  • Minimizes maintenance and downtime.
  • High Structural strength that avoids cracks and disintegration.
  • Meets the FMVSS 121 (USA) requirements for axles of 23,000lbs (10.4 tons) GAWR with an AL factor of 165 (type 30 air chamber and 5.5” slack adjuster).
  • ECE-R90 certified for motorized vehicles.

 

commercial vehicle hardware

Hardware

AAD commercial vehicle hardware sold under the Protex brand is extensive in its range and includes all those items required in the repair or replacement of truck and trailer axles. All components are manufactured by or imported from world leading international suppliers.

The components include:

  • Camshafts
  • Rollers
  • Anchor Pins
  • Retainers
  • Hub Caps
  • Slack Adjusters
  • Springs
  • Bushes
  • Wheel clamps, studs & nuts